VMTW 8X1 pulgada CBN muela abrasiva grano 80 afila herramientas de corte de acero de alta velocidad
- Marca: VIKING MOUNTAIN TOOL WORKS
- Código de Producto: B0848DGMGD
-Precision Made Solid Aluminum body 8" dia by 1" with CBN on the face and 1/4" sides of the wheel. For 5/8 inch shaft.
-Designed for use with slow speed 8 inch bench type grinders; 1800 RPM or 3600RPM
-Will never need dressing, or truing. Wheel Diameter stays the same, so you will not need to be keep adjusting your jig.
-Use with High Speed Steel (HSS)Tools Only
-Note: These wheels are made with very tight tolerences. The arbor hole is precisely cut to .6254 inches. The shaft on many grinding motors are not as percise, and may be slightly larger then .625 inch. This will cause an interfearance fit. A little bit of emery cloth on the shaft will help get the wheel on.
Size:8", 80 Grit, 1.0" Wide, For 5/8" Shaft
-Designed for use with slow speed 8 inch bench type grinders; 1800 RPM or 3600RPM
-Will never need dressing, or truing. Wheel Diameter stays the same, so you will not need to be keep adjusting your jig.
-Use with High Speed Steel (HSS)Tools Only
-Note: These wheels are made with very tight tolerences. The arbor hole is precisely cut to .6254 inches. The shaft on many grinding motors are not as percise, and may be slightly larger then .625 inch. This will cause an interfearance fit. A little bit of emery cloth on the shaft will help get the wheel on.
Size:8", 80 Grit, 1.0" Wide, For 5/8" Shaft